| View previous topic :: View next topic |
| Author |
Message |
lee866
Joined: 21 Nov 2006
Posts: 994
Location: south london
2001 Vauxhall Vectra
|
 Posted: Fri May 14, 2010 7:31 pm Post subject: vectra vxr sensor question (z28net) |
 |
|
Not sure if anyone on here has a vectra vxr or even a z28net/nel but i know some people have had them on here. I really need to know what goes on the back of the map sensor and where it goes to. There's a couple of pics to show the sensor i'm talking about. cheers
This is the sensor
Something goes into the round hold
If you lift off the vxr cover at the top right of the engine the sensor is on a bracket bolted to the inlet (2x10mm bolts)
 |
|
| Back to top |
|
 |
Spanishfly
Moderators
Joined: 07 Nov 2006
Posts: 3395
Location: S London
1989 Vauxhall Nova
|
| Posted: Sun May 16, 2010 9:27 am Post subject: |
|
|
Should go into the inlet manifold or something. I don't specifically know on that engine.
_________________
Shonky-opels.de now with VAVAVOOM |
|
| Back to top |
|
|
lee866
Joined: 21 Nov 2006
Posts: 994
Location: south london
2001 Vauxhall Vectra
|
| Posted: Sun May 16, 2010 7:45 pm Post subject: |
|
|
| I found out in the end nothing goes to it in the end. It monitors the atmospheric pressure and works in conjunction with boost pressure sensor. I spent most of Thursday looking for a vacuum that doesn't exist lol |
|
| Back to top |
|
|
|
